ASP-coatWBE
ASP-coatWBE is a pigmented, water-based seal coat typically applied as a two-coat vapour permeable system.
ASP-coatWBE is best suited to coat floors, walls and ceilings in light duty areas where a cost effective, hygienic, durable and a dust free sealer is required.
- Thickness
- 0.14 mm per coat
- Duty
- Light duty
- Finish
- Pigmented satin
- Coverage
- 6 – 8 m²/litre per coat
- Kit
- 5 litre kit covers 30 m² @ 6 m²/litre, 35 m² @ 7 m²/litre or 40 m² @ 8 m²/litre
- Working time
- 35 minutes @ 20°C
- Full cure
- 7 days at 20°C
Key facts
Benefits
Provides good chemical resistance to light chemical attack and spillages
Easily mixed and applied with a mohair roller to horizontal, vertical and overhead substrates. Can be applied to damp or green concrete.
Hygienic, easy to clean, non-tainting and non-dusting coating
Cost effective, durable coating for light duty environments
Can be used as a line marker to denote working zones
Applications
- Floors, walls and ceilings
- Light duty industrial process areas
- Warehouse & distribution centres
- Plant rooms & storage units.
- Garages
- Change rooms and ablution blocks
- Storage units
Specified in
System build-up
How ASP-coatWBE is built up on site, layer by layer, with the theoretical coverage of each component from the technical data sheet.
Coving system
- Primer and scatter sand: ASP-primeStd at 4 m²/litre; ASP-Quartz 1 at 1 kg/m²
- Coving: ASP-epoxyCove at 1.8 litre/linear metre (75 × 75 mm)
- Primer: ASP-primeStd at 4 m²/litre
- Coating: ASP-coatWBE at 6 m²/litre
Technical performance
| Criteria | Standard | Result |
|---|---|---|
| Mix ratio | 1 part Base A : 4 parts Hardener B by volume | |
| Chemical resistance | Resistant to a very wide range of chemicals | |
| Storage | Keep at an ambient temperature in dry, cold-free conditions | |
| Shelf life | 12 months in unopened original packaging |
Speed of cure at 20°C
- 24 hoursLight traffic
- 24 hoursFull traffic
- 7 daysFull chemical cure
Colours
Standard colours
- Light GreyRAL 7047
- GreyRAL 7004
- CreamRAL 1015
- YellowOchre
- RedRAL 3011
- BlackRAL 9011
Non-standard colours
- Light BlueRAL 5015
- GreenRAL 6002
- Sand YellowRAL 1002
- Signal RedRAL 3001
- Signal YellowRAL 1023
- WhiteRAL 9010
On-screen colours are a guide only. RAL numbers are an indicative colour reference. Non-standard colours are available at a premium on request, subject to a minimum order quantity. Ask for colour samples from our sales and technical team.
Preparation and application
Substrate and preparation
Concrete substrates to be coated must be sound and exhibit a minimum compressive strength of 25N/mm² and a minimum of 1.5N/mm² tensile strength for the application of the proposed system. The profile and levels must be appropriate for the application of the proposed system, capable of bearing loads, free of cracks and voids, and free from laitance, dust, oil and other contamination. Should there be impurities such as penetrated oils, etc., please refer to the ASP Technical Team for a suitable and appropriate substrate preparation guideline or solution. The substrate may be prepared by diamond grinding to remove laitance. Irregularities, small damages and cracks must be repaired with an epoxy filler.
Primer
Mix Base A and Hardener B with a low speed drill fitted with a spiral mixing blade for approximately 3 minute to obtain a homogeneous mixture. Ensure excessive air is not introduced while mixing. The mixed material must be applied within 35 minutes at 20˚C. Apply immediately after mixing with a short haired mohair roller, working the resin well into the substrate, permeating any surface irregularities. On porous substrates apply further resin until the substrate is completely wetted out. Avoid any ponding of the primer.
Topcoat
Apply immediately after mixing with a short haired mohair roller. ASP-coatWBE must be applied in two coats. The second coat may be applied no later than 24 hours after the first coat. Optional non-slip and textured finishes are available. For more detailed information on substrate requirements and preparation, priming and application of the top coat, please refer to the product’s method statement.
Maintenance
Clean all spillages on ASP-coatWBE immediately to maintain its appearance and lifespan. Clean the floor regularly with a rotary brush or mechanical scrubber and a suitable detergent. See how to clean and maintain a resin floor.
Health and safety
Applicators must use appropriate personal protective equipment. Dispose of used and empty packaging, solvents and washings in line with local environmental, health and safety by-laws. Refer to the product's material safety data sheet for detail.
For full substrate requirements, priming and application of the top coat, refer to the product's method statement or ask our technical team.
Downloads
Want to know when this data sheet changes? Get spec updates by email.
SubscribeQuestions about ASP-coatWBE
What is ASP-coatWBE?
ASP-coatWBE is a pigmented, water-based seal coat typically applied as a two-coat vapour permeable system.
Where is ASP-coatWBE used?
ASP-coatWBE is best suited to coat floors, walls and ceilings in light duty areas where a cost effective, hygienic, durable and a dust free sealer is required. Typical applications include floors, walls and ceilings, light duty industrial process areas, warehouse & distribution centres, plant rooms & storage units., garages and change rooms and ablution blocks.
How thick is ASP-coatWBE?
ASP-coatWBE is applied at 0.14 mm per coat and is suited to light duty areas.
How much area does a kit of ASP-coatWBE cover?
The theoretical coverage is 6 – 8 m²/litre per coat. A 5 litre kit covers 30 m² @ 6 m²/litre, 35 m² @ 7 m²/litre or 40 m² @ 8 m²/litre. Actual coverage depends on the substrate and site conditions.
How long does ASP-coatWBE take to cure?
At 20°C it takes light traffic after 24 hours, full traffic after 24 hours and full chemical cure at 7 days. Once mixed, the working time is 35 minutes @ 20°C.
What colours is ASP-coatWBE available in?
ASP-coatWBE comes in Light Grey (RAL 7047), Grey (RAL 7004), Cream (RAL 1015), Yellow, Red (RAL 3011) and Black (RAL 9011). Non-standard colours (Light Blue, Green, Sand Yellow, Signal Red, Signal Yellow and White) are available at a premium, subject to a minimum order quantity.
What is the shelf life of ASP-coatWBE?
12 months in unopened original packaging. Keep at an ambient temperature in dry, cold-free conditions.
More from the epoxy range
Enquire about ASP-coatWBE
Tell us about the area and its conditions. Our technical team will confirm the right system, quantities and an applicator near you.